Follow The Below Steps:

• Unroll the required length and cut the UTP network cable.
• Remove the insulin or outer jacket of the cable. You can strip off the outer jacket with the help of a wire stripper.
• Separate the wires pairs. You need to separate the wires with their dividers.
• Follow the mnemonic 1-2-3-6/3-6-1-2 to arrange the wires depending on the color of the wires. You’ve to arrange the wires with the wiring procedure.
• Press and cut the wires about 1/2″ long from the base of the cover of that wire.
• Keep the wires flat and crimp them into the connectors.
• Repeat the process for another end of your Network cable.
• Test your cable and make sure it’s working.